Available with IBI Go & IBI Pro, click on the respective links to find out more.
IBI uses the current time as the departure time by default, but you can also set this to be a fixed time. IBI calculates the best delivery route from that time and provides the estimated arrival times for each address.
This section of the IBI manual shows you step-by-step how to set a fixed departure time.
This page also explains how to adjust how the estimated arrival time is displayed.
Read here how to specify a fixed starting point for IBI instead of using the current GPS location.
Set departure time
Tap the CURRENT LOCATION block at the top of the list of addresses.
Next, click on CHANGE DEPARTURE TIME.
Enable USE CUSTOM TIME, and enter the time you want to use as fixed time.
Show arrival time
IBI uses two different ways of showing estimated arrival time:
- Minutes left
- Exact ETA
Read further in this section to find out how to swap between these settings.
Click on the transport mode icon at the top right of the screen to quickly get to the route settings, or click on the MENU button in the bottom right.
Next, click on SETTINGS
Click on ROUTE SETTINGS.
Enable SHOW ARRIVAL TIME INSTEAD OF REMAINING TIME PER ADDRESS.
On this page you are also able to change the departure time.
